OpenClaw Gateway DX

Diagnose, fix, and document openclaw gateway issues. Covers both main (port 18789) and vesper profile (port 18999) gateways.

When to Use

• - Gateway not starting or crash-looping
• TUI/CLI can't connect (pairing required, password mismatch, device token mismatch)
• Gateway unresponsive or high memory
• After openclaw version upgrades
• User says "openclaw is stuck" or similar

Triage Protocol

Run these in parallel to assess state:

CODEBLOCK0

Common Failure Modes

0. Failover Cascade (All Providers Down)

Symptom: All models failed (N): followed by per-provider errors. May also appear as "The model has crashed without additional information. (Exit code: null)" Diagnosis: Check the full error chain — each attempt cycles primary → fallback1 → fallback2. All must fail for the user to see an error. Common error signatures per provider:

• - Anthropic: The AI service is temporarily overloaded (transient, or stale token)
• OpenAI Codex: OAuth token refresh failed for openai-codex or refresh_token_reused (expired access token + consumed refresh token)
• Google/Gemini: No API key found for provider "google" (provider never configured in auth-profiles.json)
• LM Studio: Python errors like AttributeError: 'list' object has no attribute 'swapaxes' (model inference bug)

Fix: Identify which providers are broken and fix each:

# Check fallback config (use affected profile's config dir)
cat ~/.openclaw/openclaw.json | python3 -c "import sys,json; print(json.dumps(json.load(sys.stdin)['agents']['defaults']['model'], indent=2))"
# Check per-agent auth tokens + expiry
python3 -c "
import sys,json,time
data=json.load(open('$HOME/.openclaw/agents/main/agent/auth-profiles.json'))
now=time.time()*1000
for k,v in data.get('profiles',{}).items():
    exp=v.get('expires',0)
    expired='EXPIRED' if exp and exp<now else 'valid'
    has_token='yes' if v.get('access') or v.get('token') else 'NO'
    print(f'{k}: type={v.get(\"type\",\"?\")} token={has_token} expires={expired}')
"

For OAuth expiry (OpenAI Codex): openclaw configure (interactive re-auth). Add --profile vesper if vesper. For missing provider keys (Google etc.): openclaw agents add <provider> or remove unconfigured providers from fallback chain. Prevention: Ensure all providers in the fallback chain are actually configured. Use same-provider fallbacks (e.g. different Anthropic models) instead of cross-provider for predictable failure modes.

1. Expired Channel Token (Slack xoxe.xoxb-)

Symptom: Crash loop with Unhandled promise rejection: Error: An API error occurred: token_expired Fix: CODEBLOCK2

2. Config Wiped by Upgrade

Symptom: Gateway start blocked: set gateway.mode=local (current: unset) Fix: Restore from backup: CODEBLOCK3

3. Stale Lock File

Symptom: Gateway won't start, references old PID Fix: CODEBLOCK4

4. Device Token Mismatch / Pairing Required

Symptom: unauthorized: device token mismatch or pairing required Fix: CODEBLOCK5

5. Password Mismatch (multi-profile)

Symptom: unauthorized: gateway password mismatch Fix: Sync passwords across profiles. All profiles should use $OPENCLAW_GATEWAY_PASSWORD to match the env var in shell rc (~/.bashrc or ~/.zshrc).

6. Memory Bloat / Unresponsive

Symptom: Gateway listening but not responding, RSS exceeds Critical threshold (see Memory Thresholds) Fix: CODEBLOCK6

7. Invalid Plugin Entry

Symptom: Config invalid: plugins.entries.X: plugin not found Fix: Remove the stale plugin entry from ~/.openclaw/openclaw.json, then openclaw gateway start.

8. Port Conflict / Orphan Processes

Symptom: Port 18789 is already in use or multiple gateway PIDs Fix: CODEBLOCK7

9. Custom Plugin Missing configSchema

Symptom: Crash loop with plugins: plugin: plugin manifest requires configSchema Diagnosis: A plugin in ~/.openclaw/extensions/ (auto-discovered) or plugins.load.paths has an openclaw.plugin.json without the required configSchema field. Run openclaw doctor --fix — the "Plugin diagnostics" section names the offending manifest. Fix: Add empty configSchema to the plugin manifest:

"configSchema": {
  "type": "object",
  "additionalProperties": false,
  "properties": {}
}

Then restart: launchctl bootstrap gui/501 ~/Library/LaunchAgents/ai.openclaw.gateway.plist Prevention: All plugin manifests require configSchema in 2026.3.2+, even if empty. Run openclaw doctor after creating custom plugins before restarting.

10. Invalid JSON in Config (Hand-Edit Damage)

Symptom: CLI commands fail with json.decoder.JSONDecodeError or Unexpected token. Gateway may still run (it was started before the edit) but CLI/TUI can't parse the config to connect. Diagnosis: Someone hand-edited openclaw.json and introduced unquoted keys, trailing commas, or other invalid JSON. Fix: Validate and fix the JSON:

python3 -c "import json; json.load(open('$HOME/.openclaw/openclaw.json'))"
# Fix the reported line — common issues: unquoted keys, trailing commas

Prevention: Use openclaw configure or a JSON-aware editor. After manual edits, validate with the python one-liner above.

11. Missing gateway.remote.token (Token Auth Mode)

Symptom: CLI/TUI fails with gateway token missing (set gateway.remote.token to match gateway.auth.token) Diagnosis: The gateway uses gateway.auth.mode: "token" but gateway.remote.token is not set. The CLI reads remote.token to authenticate — without it, all connections are rejected. Fix: Add gateway.remote.token matching gateway.auth.token:

# In openclaw.json, inside the "gateway" section:
"remote": {
  "token": "<same value as gateway.auth.token>"
}

Then restart the gateway. Note: Any profile using gateway.auth.mode: "token" needs gateway.remote.token set. Profiles using password auth ($OPENCLAW_GATEWAY_PASSWORD) are not affected.

12. Config Patch Restart Cascade (LaunchAgent Left Unloaded)

Symptom: Gateway down, port not listening, launchctl print says service not found. Error log shows config change requires gateway restart followed by restart failure. Diagnosis: Multiple config.patch calls (e.g., from an agent using the gateway tool) changed gateway.auth.* or other restart-requiring keys. Each patch triggers a deferred restart. The restart mechanism fails with one of:

• - INLINECODE47
• INLINECODE48

The gateway falls back to in-process restart, becomes unstable, eventually receives SIGTERM, and the LaunchAgent is left unloaded.
Fix:

launchctl bootstrap gui/501 ~/Library/LaunchAgents/ai.openclaw.gateway.plist

Prevention:

• - Batch config changes that touch gateway.auth.* into a single config.patch call to minimize restart triggers
• This is a recurring upstream bug in openclaw 2026.3.x — the LaunchAgent restart mechanism is unreliable across multiple error modes
• Consider a watchdog or KeepAlive with ThrottleInterval=30 in the plist
• If using the gateway tool's config.patch action, combine auth + plugin + compaction changes into one call

13. OPENCLAWGATEWAYTOKEN Env Var Overriding Multi-Profile Token Auth

Symptom: unauthorized: gateway token mismatch on openclaw --profile vesper (or any non-default profile), even when gateway.auth.token and gateway.remote.token match in the profile's config. Main profile works fine. Diagnosis: The CLI resolves auth tokens with this precedence:

process.env.OPENCLAW_GATEWAY_TOKEN > gateway.remote.token (config)

If OPENCLAW_GATEWAY_TOKEN is set in shell rc (~/.zshrc/~/.bashrc) to main's token, the CLI sends main's token to ALL profiles, including vesper — which has its own gateway.auth.token. Fix: Sync all profiles to use the same gateway auth token (matching $OPENCLAW_GATEWAY_TOKEN):

# Check env var
echo $OPENCLAW_GATEWAY_TOKEN
# In each profile's openclaw.json, set gateway.auth.token AND gateway.remote.token to match

Alternative: Remove OPENCLAW_GATEWAY_TOKEN from shell rc and rely solely on config-file tokens. Then each profile can have independent tokens. Prevention: When using OPENCLAW_GATEWAY_TOKEN env var with multi-profile setups, all profiles must use the same auth token value. The env var is profile-agnostic.

14. LaunchAgent Plist Overwritten to Wrong Profile

Symptom: unauthorized: gateway token mismatch on main profile. Main gateway appears to be running (port listening) but uses wrong config. Vesper commands may work against main's port. Diagnosis: The ai.openclaw.gateway.plist was overwritten (likely by openclaw --profile vesper gateway install or agent config patches) to point all env vars to vesper's state dir. Check:

grep OPENCLAW_STATE_DIR ~/Library/LaunchAgents/ai.openclaw.gateway.plist
# Should show ~/.openclaw, NOT ~/.openclaw-vesper
grep OPENCLAW_PROFILE ~/Library/LaunchAgents/ai.openclaw.gateway.plist
# Should NOT be present (main is the default profile)

Fix: Edit the plist to restore correct profile paths:

• - OPENCLAW_STATE_DIR → INLINECODE68
• INLINECODE69 → INLINECODE70
• Remove OPENCLAW_PROFILE key (main doesn't need it)
• INLINECODE72 → INLINECODE73
• INLINECODE74 → INLINECODE75
• INLINECODE76 → INLINECODE77
• INLINECODE78 → INLINECODE79

Then restart: launchctl bootout gui/501/ai.openclaw.gateway && launchctl bootstrap gui/501 ~/Library/LaunchAgents/ai.openclaw.gateway.plist
Prevention: After running openclaw --profile <name> gateway install, verify BOTH plists still point to the correct profiles. The install command may overwrite the default profile's plist.

15. Session Context Overflow + Compaction Timeout (Messages Swallowed)

Symptom: Messages received but never responded to. Bot shows "typing" for ~2 minutes then stops (typing TTL reached). Same behavior across ALL providers (Anthropic, Codex, Gemini). Switching providers does not help. Diagnosis: The agent session has grown too large (>90% of context window). Compaction times out, blocking the message processing lane indefinitely.

# Check session token counts
cat ~/.openclaw/agents/main/sessions/sessions.json | python3 -c "
import sys,json
data=json.load(sys.stdin)
for k,v in data.items():
    tokens=v.get('contextTokens',0)
    pct=tokens/200000*100
    flag=' ⚠️ BLOATED' if pct>75 else ''
    print(f'{k}: {tokens:,} tokens ({pct:.0f}%){flag}')
"
# Check for compaction timeout in logs
grep -i 'timed out during compaction\|embedded run timeout' ~/.openclaw/logs/gateway.err.log | tail -5
# Check for typing TTL (message received but agent stuck)
grep 'typing TTL reached' ~/.openclaw/logs/gateway.log | tail -5

Key log signatures:

• - embedded run timeout: runId=... timeoutMs=600000 — compaction timed out at 600s
• INLINECODE84 — session remains at bloated size
• INLINECODE85 — bot received message, started typing, but agent never responded

Fix: Reset the bloated session:

# 1. Find the session transcript
ls -la ~/.openclaw/agents/main/sessions/*.jsonl
# 2. Rename transcript to trigger reset
TIMESTAMP=$(date -u +%Y-%m-%dT%H-%M-%S.000Z)
mv ~/.openclaw/agents/main/sessions/<session-id>.jsonl \
   ~/.openclaw/agents/main/sessions/<session-id>.jsonl.reset.$TIMESTAMP
# 3. Remove session entry from sessions.json
python3 -c "
import json
path='$HOME/.openclaw/agents/main/sessions/sessions.json'
data=json.load(open(path))
# Delete the bloated session entry (e.g., 'agent:main:main')
del data['agent:main:main']
json.dump(data, open(path, 'w'), indent=2)
"
# 4. Restart gateway
launchctl bootout gui/501/ai.openclaw.gateway && launchctl bootstrap gui/501 ~/Library/LaunchAgents/ai.openclaw.gateway.plist

Prevention:

• - Ensure contextPruning is configured on ALL profiles: INLINECODE87
• Monitor session token counts — alert when any session exceeds 150K (75%)
• Consider periodic /reset for long-running persistent sessions (weekly)
• INLINECODE89 + provider-agnostic failures = session bloat, not provider issue

16. Agent Stuck on Hung API Call (Lane Deadlock Without Errors)

Symptom: Messages received but never responded to. No errors in logs. No lane wait exceeded. No typing TTL reached for the stuck call. Gateway process healthy, event loop alive (cron timers firing). Channel status shows in: Xm ago but out: Ym ago where Y >> X. Diagnosis: The agent's API call to the LLM provider hung indefinitely — neither returned nor timed out. The lane is blocked but below the lane wait exceeded threshold logging interval, OR the lane wait log already fired and the call is still stuck.

# 1. Check channel in/out gap (indicates processing is stuck)
openclaw --profile <profile> channels status

# 2. Check last session transcript entry — look for unanswered tool results
tail -5 ~/.openclaw-vesper/agents/main/sessions/*.jsonl | python3 -c "
import sys, json
for line in sys.stdin:
    line = line.strip()
    if not line: continue
    try:
        d = json.loads(line)
        msg = d.get('message',{})
        role = msg.get('role','?')
        ts = d.get('timestamp','')
        if role == 'toolResult':
            tool = msg.get('toolName','?')
            print(f'{ts} toolResult({tool}) — agent should respond but may be stuck')
        elif role == 'user':
            print(f'{ts} user message — waiting for agent response')
    except: pass
"

# 3. Verify event loop is alive (cron still firing)
grep 'cron: timer armed' /tmp/openclaw/openclaw-$(date +%Y-%m-%d).log | tail -1

# 4. Check compaction model auth (misconfigured = compaction fails silently)
python3 -c "
import json
c=json.load(open('$HOME/.openclaw-vesper/openclaw.json'))
model=c.get('agents',{}).get('defaults',{}).get('compaction',{}).get('model','not set')
print(f'Compaction model: {model}')
provider=model.split('/')[0] if '/' in model else model
# Check if provider has auth
import os
for d in ['.openclaw', '.openclaw-vesper']:
    p=os.path.expanduser(f'~/{d}/agents/main/agent/auth-profiles.json')
    if os.path.exists(p):
        data=json.load(open(p))
        found=[k for k in data.get('profiles',{}) if provider.replace('-cli','') in k]
        print(f'  {d}: auth={\"yes\" if found else \"NO - MISCONFIGURED\"} ({found})')
"

Distinguishing from #15 (Context Overflow):

• - #15: Session tokens >90%, timed out during compaction, affects ALL providers
• #16: Session tokens normal/low, no compaction errors, single API call hangs silently

Fix: Restart the gateway:

launchctl bootout gui/501/ai.openclaw.vesper && launchctl bootstrap gui/501 ~/Library/LaunchAgents/ai.openclaw.vesper.plist

Prevention:

• - Ensure compaction model provider has valid auth (common: google-gemini-cli set but no gemini auth profile)
• Lower timeoutSeconds from 1800 (30m) to 600 (10m) to detect hung calls faster
• Monitor channel in/out gap — if out lags in by >5 minutes, agent is stuck
• INLINECODE100 + no subsequent sendMessage within 5 minutes = stuck, not slow

17. Compaction Model Timeout (Context Degradation Without Errors)

Symptom: Messages processed but context degrades over time. Agent "forgets" recent context or gives less coherent responses. No visible errors to the user — gateway keeps running. Diagnosis:

grep -i "timed out during compaction" ~/.openclaw/logs/gateway.err.log | tail -10
grep "compaction-safeguard" ~/.openclaw/logs/gateway.err.log | tail -10

Log signatures:

• - INLINECODE102
• INLINECODE103

Root cause: The compaction model (configured in agents.defaults.compaction.model) is timing out. For example, google-gemini-cli/gemini-2.5-flash has OAuth latency + API rate limits that cause frequent timeouts. The gateway falls back to "safeguard" mode: dropping old message chunks without generating a proper summary. This preserves recent context but loses historical continuity — the agent gradually loses older conversation history. Distinguishing from #15 (Context Overflow):

• - #15: Session tokens >90%, compaction times out because of sheer size, messages swallowed entirely
• #17: Session tokens normal, compaction model itself is slow/unreliable, messages processed but context quality degrades silently

Fix: Switch compaction model to a faster/more reliable provider:

# Check current compaction model
cat ~/.openclaw/openclaw.json | python3 -c "import sys,json; c=json.load(sys.stdin); print(c.get('agents',{}).get('defaults',{}).get('compaction',{}).get('model','not set (using primary model)'))"

# Switch to Sonnet (proven reliable for compaction)
# Use gateway config.patch or edit openclaw.json directly:
# agents.defaults.compaction.model = "anthropic/claude-sonnet-4-6"

Good compaction model choices:

• - anthropic/claude-sonnet-4-6 — reliable, fast, good summarization
• INLINECODE107 — same tier
• INLINECODE108 — cheapest but prone to timeout (OAuth + rate limits)
• Local models via LM Studio — $0 but needs testing for summary quality

Prevention: Avoid cross-provider compaction models that add auth overhead. Same-provider as primary model reduces failure modes. Monitor for timed out during compaction in err.log periodically.

18. Self-Reinforcing Config.Patch Crash Loop (Post-Update / Post-Restart)

Symptom: Gateway starts, runs for ~2 minutes, receives SIGTERM, LaunchAgent left unloaded. Repeats on every manual bootstrap. No config.patch visible in gateway logs (it happens too fast or logs rotate). Update to latest version does not fix it. Diagnosis: The agent's session preserves context about a pending config change (e.g., "fix auth order array"). On each restart, the agent resumes that intent and immediately issues a config.patch on auth.* keys, triggering a restart cascade. The gateway dies, gets re-bootstrapped, and the cycle repeats because the session still has the patching intent.

# 1. Check if sessions are bloated (session context preserves patching intent)
python3 -c "
import json
data=json.load(open('$HOME/.openclaw/agents/main/sessions/sessions.json'))
bloated=[k for k,v in data.items() if v.get('contextTokens',0)>=150000]
print(f'Total: {len(data)}, Bloated: {len(bloated)}')
for k in bloated[:5]: print(f'  {k}')
"
# 2. Check if plist was regenerated after update
ls -la ~/Library/LaunchAgents/ai.openclaw.gateway.plist
openclaw --version
# If plist mtime is before the update, it's stale

Distinguishing from #12 (Config Patch Restart Cascade):

• - #12: One-time config.patch crash, manual bootstrap fixes it
• #18: Bootstrap→crash→bootstrap loop because session context re-triggers config.patch on every restart

Fix:

# 1. Regenerate plist for current version
openclaw gateway install
# 2. Prune bloated sessions (breaks the loop by clearing patching intent)
python3 -c "
import json
path='$HOME/.openclaw/agents/main/sessions/sessions.json'
data=json.load(open(path))
healthy={k:v for k,v in data.items() if v.get('contextTokens',0)<150000}
print(f'Pruning {len(data)-len(healthy)} bloated, keeping {len(healthy)} healthy')
json.dump(healthy, open(path, 'w'), indent=2)
"
# 3. Bootstrap
launchctl bootstrap gui/501 ~/Library/LaunchAgents/ai.openclaw.gateway.plist

Prevention:

• - Always run openclaw gateway install after openclaw update to regenerate the plist
• Restrict agent's ability to config.patch auth.* keys without human confirmation
• Session reset breaks the loop — if the gateway crashes >2 times in a row, prune sessions before next bootstrap

19. Auto-Update Kills All Gateways Simultaneously

Symptom: Both main AND vesper gateways go down at the same time. No reboot. No config changes. LaunchAgents left unloaded for both. Diagnosis: OpenClaw auto-updated to a new version. The package was replaced hours earlier but the deferred restart fired later, sending SIGTERM to all running gateway processes within seconds of each other. The kickstart -k fix from v2026.3.12 does NOT prevent this — auto-update restarts still leave LaunchAgents unloaded.

# 1. Confirm simultaneous SIGTERM
grep 'signal SIGTERM received' ~/.openclaw/logs/gateway.log | tail -1
grep 'signal SIGTERM received' ~/.openclaw-vesper/logs/gateway.log | tail -1
# If timestamps are within ~10 seconds → auto-update

# 2. Check version changed
openclaw --version
ls -la /opt/homebrew/lib/node_modules/openclaw/package.json  # mtime = update time

Distinguishing from other failures:

• - #12/#18: Single gateway, triggered by config.patch
• #19: ALL gateways die within seconds, no config.patch in logs, version changed

Fix:

# 1. Prune bloated sessions for all profiles
for dir in ~/.openclaw ~/.openclaw-vesper; do
  f="$dir/agents/main/sessions/sessions.json"
  [ -f "$f" ] && python3 -c "
import json
path='$f'
data=json.load(open(path))
healthy={k:v for k,v in data.items() if v.get('contextTokens',0)<150000}
pruned=len(data)-len(healthy)
if pruned:
    json.dump(healthy, open(path, 'w'), indent=2)
    print(f'$(basename $dir): pruned {pruned}')
"
done
# 2. Regenerate plists for new version
openclaw gateway install --force
openclaw --profile vesper gateway install --force
# 3. Verify plist alignment (failure mode #14)
grep OPENCLAW_STATE_DIR ~/Library/LaunchAgents/ai.openclaw.gateway.plist
grep OPENCLAW_STATE_DIR ~/Library/LaunchAgents/ai.openclaw.vesper.plist
# 4. Restart both
launchctl bootout gui/501/ai.openclaw.gateway 2>/dev/null; launchctl bootstrap gui/501 ~/Library/LaunchAgents/ai.openclaw.gateway.plist
launchctl bootout gui/501/ai.openclaw.vesper 2>/dev/null; launchctl bootstrap gui/501 ~/Library/LaunchAgents/ai.openclaw.vesper.plist

Prevention:

• - Disable auto-update if stability is critical: check update.autoInstall in INLINECODE116
• If auto-update is desired, add a post-update hook that runs openclaw gateway install --force for all profiles
• Always follow the Post-Upgrade Checklist after any version change (manual or auto)

Memory Thresholds

RSS	Status	Action
< 500MB	Healthy	None
500MB-1.5GB

Elevated | Monitor | | 1.5GB-2.5GB | High | Schedule restart | | > 2.5GB | Critical | Restart now |

Node Heap Tuning

The gateway runs on Node.js and defaults to ~4GB max old space. For long-running gateways or heavy plugin loads, increase via --max-old-space-size in the LaunchAgent plist's ProgramArguments:

CODEBLOCK25

Insert after the node binary path, before the entry JS file. Current state:

• - vesper: --max-old-space-size=16384 (16GB) — set to handle QMD/memory-search workloads
• main: not set (Node default ~4GB)

To add or change, edit the plist directly and reload:
CODEBLOCK26

If the gateway OOMs before hitting the RSS thresholds above, this is likely the fix.

Config Paths

Profile	Config	State	Port
main	INLINECODE122	INLINECODE123	18789
vesper

~/.openclaw-vesper/openclaw.json | ~/.openclaw-vesper/ | 18999 |

Plugin auto-discovery paths (scanned on startup, no config entry needed):

• - ~/.openclaw/extensions/<plugin-id>/ — per-profile custom plugins
• Paths listed in plugins.load.paths — explicitly loaded extensions

Auth

• - Gateway token: $OPENCLAW_GATEWAY_TOKEN (env var in shell rc — ~/.zshrc/~/.bashrc). Takes precedence over gateway.remote.token in config. Profile-agnostic — all profiles must use the same token when this env var is set.
• Gateway password: $OPENCLAW_GATEWAY_PASSWORD (env var in shell rc — ~/.zshrc/~/.bashrc)
• CLI auth resolution order: $OPENCLAW_GATEWAY_TOKEN > gateway.remote.token (config)
• INLINECODE137 — only bypasses Control UI, not CLI/TUI
• CLI/TUI always requires device pairing in 2026.2.25+

API Token Locations (v2026.3.1+)

Top-level openclaw.json auth.profiles declares profile type/mode only — no tokens. Actual tokens live in per-agent auth profile files:

# Main profile
~/.openclaw/agents/main/agent/auth-profiles.json
~/.openclaw/agents/codex/agent/auth-profiles.json

# Vesper profile
~/.openclaw-vesper/agents/main/agent/auth-profiles.json
~/.openclaw-vesper/agents/codex/agent/auth-profiles.json

Each has profiles.<provider>:default with access/refresh/expires for OAuth, or token for API keys. The expires field is epoch milliseconds — compare to Date.now() or time.time()*1000 to check expiry.

Fresh Anthropic setup tokens: INLINECODE147

doctor --fix Token Migration (v2026.3.1)

openclaw doctor --fix removes token fields from top-level auth.profiles in openclaw.json (schema change). This does NOT affect per-agent auth profiles — those still use token as the field name. If doctor runs and removes tokens from the top-level config, the gateway still works because it reads from per-agent files at runtime.

OpenAI Codex OAuth Refresh

Symptom: OAuth token refresh failed for openai-codex or refresh_token_reused — the access token expired and the refresh token is single-use/already consumed. Diagnosis: Check expires field in auth-profiles.json — if epoch ms is in the past, access token is expired. If refresh also fails, full re-auth needed. Fix: Interactive re-auth: openclaw configure (add --profile vesper if vesper profile).

Unconfigured Fallback Provider

Symptom: No API key found for provider "<provider>" with auth store path shown. Diagnosis: The model fallback chain references a provider that was never set up in auth-profiles.json. Fix: Either configure the provider (openclaw agents add <provider>) or remove it from the fallback chain in openclaw.json → agents.defaults.model.fallbacks.

Memory Search / QMD

Check memory search status as part of triage when the agent isn't responding correctly:

openclaw --profile vesper memory status

Key config: agents.defaults.memorySearch.enabled in openclaw.json — if false, the memory_search/memory_get tools won't register even if listed in tools.alsoAllow.

Enabling requires a gateway restart (hot-reload picks up the config but tool registration needs restart).

QMD / Memory Search Debugging

INLINECODE169 runs on Node.js (#!/usr/bin/env node), NOT Bun. The sqlite-vec extension loads fine under Node's better-sqlite3. Previous reports of "sqlite-vec/Bun" issues are a red herring for OpenClaw users.

If qmd embed hangs or fails:
CODEBLOCK29

Key commands for memory search triage:

• - qmd status — shows collections, document counts, pending embeds
• INLINECODE174 — process pending embeddings (runs incrementally)
• INLINECODE175 — force re-embed everything (nuclear option)
• INLINECODE176 — re-scan collection source for new/changed files

Gateway Restart (by profile)

Profile	LaunchAgent plist	Stop + Start
main	INLINECODE177	INLINECODE178
vesper

~/Library/LaunchAgents/ai.openclaw.vesper.plist | openclaw --profile vesper gateway stop && launchctl bootstrap gui/501 ~/Library/LaunchAgents/ai.openclaw.vesper.plist |

If gateway start says "Gateway service not loaded", use launchctl bootstrap directly.

Post-Fix Protocol

After fixing any issue:

1. 1. Verify: openclaw channels status — all channels should show "running"
2. Check memory: INLINECODE184
3. Write incident report to INLINECODE185

Incident Report Template

CODEBLOCK30

Post-Upgrade Checklist

Run after any openclaw version bump:
CODEBLOCK31

Vesper Profile Commands

Prefix all commands with --profile vesper:
CODEBLOCK32